Yachtcare Epoxy 2K filler, Base
The Yachtcare Epoxy 2K filler is particularly suitable for work in the underwater area. It is characterized above all by its high water resistance. This means that nothing stands in the way of minor repairs to the underwater hull. The
Use Epoxy Base Filler well.
It can be used on all boat building materials such asGFK, CFK, steel, aluminum and rigid woodand can be applied in layers up to two centimetres thick.
- Delivery with DHL for 7.90€ within Germany in 2-4 days; International from 11.90€ in 3-5 days.
The Yachtcare Epoxy 2K filler is particularly suitable for work underwater. It is characterized above all by its high water resistance. This means that nothing stands in the way of minor repairs to the underwater hull. The Epoxy Base Filler can also be used well in the above-water area.
It can be used on all boat building materials such as GRP, CFRP, steel, aluminum and rigid wood and can be applied in a layer thickness of up to two centimeters.
GRP, steel and aluminum substrates should be pre-primed with a two-component epoxy primer.
The EPOXY BASE FILLER is a solvent-free, two-component epoxy-based filler and fine filler.
The material data
- Content: 500g
- Color: light gray
- Specific gravity: approx. 1.78g/ml
- Base: Epoxy
MATERIAL DATA:
Packaging 500 g container
Color Base white, Hardener gray
Standard layer thickness: up to max. 2 cm TSD
Volume solids: 100%
Theoretically Yield: approx. 1.1 m²/kg (500 µm) - approx. 2m²/l
Specific gravity: approx. 1.78 g/ml
Flash point: +100°C
Mixing ratio: Base : Hardener, 2 : 1 by weight or volume
Pot life: approx. 30 minutes (20°C) Can be sanded after: 6 hours (20°C) Recoating interval with a primer: min. 12 hours max. 24 hours (20°C) (sanded filler). Fully cured: after 5 days (20°C).
PROCESSING
The surface must be clean, dry, free of grease and free of dirt. Loose or poorly adhering components must also be removed or sanded away beforehand. Remove sanding dust thoroughly. We recommend always priming the surface with a 2-component epoxy primer before filling work.
Mix the base and hardener of the EPOXY BASE FILLER in the specified mixing ratio and stir well until a homogeneous, light grey colour appears.
Only mix the amount that can be used within 15 minutes. EPOXY BASE FILLER should not be used at temperatures below +10°C.
No more than 2.0 cm of layer thickness should be applied per application. If a higher total layer thickness is to be achieved, the last layer must be sanded before applying a new filler layer. The maximum reworking interval between 2 filler layers should not exceed 24 hours (+20°C).
The curing of the applied product can be accelerated by applying heat up to a maximum of +60°C (tempering).
PRECAUTIONS
For information on handling the products and disposal, please refer to the valid safety data sheet and the corresponding information sheets of the Chemical Industry Accident Insurance Association.
The above information, in particular the suggestions for processing and using our products, is based on our knowledge and experience in normal cases. Due to the different materials, substrates and differing working conditions, a guarantee of a work result or liability, from whatever legal relationship, can neither be based on these instructions nor on oral advice, unless we are guilty of intent or gross negligence. The user must prove in writing that he has provided us with all the knowledge required for a proper and promising assessment in a timely and complete manner. Third-party intellectual property rights must be observed. In all other respects, our respective terms of sale and delivery apply.
The latest technical data sheet applies and should be requested from us.
1. Delivery time
Delivery within Germany: 2-4 days, internationally 3-5 days.
2. Shipping costs
The exact shipping costs will be displayed in your shopping cart after you have selected the shipping method.
